| Ultrahigh damping capacity achieved by modulating R phase in Ti49. 2Ni50. 8 shape memory alloy wires
M Jin, Y Song, X Wang, P Chen, G Pang, X Jin
Scripta Materialia 183, 102-106
|
|
2020 |
| Homogeneous elasto-plastic deformation and improved strain compatibility between austenite and ferrite in a co-precipitation hardened medium Mn steel with enhanced hydrogen …
Y Li, W Li, N Min, H Liu, X Jin
International Journal of Plasticity, 102805
|
|
2020 |
| Communication—The mechanism of hydrogen permeation resistance of Ni coating enhanced by the incorporation of graphene
P Zhou, Z Yan, Y Wu, W Li, X Jin
ECS Journal of Solid State Science and Technology
|
|
2020 |
| Combination of thermodynamic knowledge and multilayer feedforward neural networks for accurate prediction of MS temperature in steels
Q Lu, S Liu, W Li, X Jin
Materials & Design, 108696
|
|
2020 |
| Mechanical response of a medium manganese steel with encapsulated austenite
Y Li, W Li, N Min, W Liu, C Zhang, X Jin
Scripta Materialia 178, 211-217
|
1 |
2020 |
| Investigation of hierarchical precipitation on bimodal-grained austenite and mechanical properties in quenching-partitioning-tempering steel
Y Li, W Li, C Xu, N Min, W Liu, H Liu, X Jin
Materials Science and Engineering: A, 139207
|
|
2020 |
| A Review of Current State and Prospect of the Manufacturing and Application of Advanced Hot Stamping Automobile Steels
X JIN, Y GONG, X HAN, H DU, W DING, B ZHU, Y ZHANG, Y FENG, M MA, ...
Acta Metall Sin 56 (4), 411-428
|
|
2020 |
| Enhancement of Impact Toughness Via Tailoring Deformation Compatibility of Constituent Phases in Duplex Q&P Steel with Excellent Strength and Ductility
H Du, Y Gong, T Liang, Y Li, Y Xu, X Lu, Q Zeng, X Jin
Metallurgical and Materials Transactions A, 1-21
|
1 |
2020 |
| Martensitic transformation and elastocaloric effect of Ti–Ni–Cu–Al microwire
F Xiao, Z Li, H Chen, Z Li, K Huang, X Jin, T Fukuda
Materialia 9, 100547
|
|
2020 |
| A newly-designed hot stamping plus non-isothermal Q&P process to improve mechanical properties of commercial QP980 steel
Y Xu, Y Gong, H Du, W Ding, B Zhu, X Jin, Y Zhang, L Wang
International Journal of Lightweight Materials and Manufacture 3 (1), 26-35
|
3 |
2020 |
| An integrated model of impact-abrasive wear in bainitic steels containing retained austenite
B Liu, W Li, X Lu, X Jia, X Jin
Wear 440, 203088
|
2 |
2019 |
| Rapid construction of multicomponent TRIP stainless steel by powder feeding laser deposition for comprehensive properties
K Zhang, W Li, Y Xu, B Liu, Y Li, D Liu, X Ding, X Jin
Materials & Design 184, 108171
|
2 |
2019 |
| Investigation of hydrogen diffusion and trapping behavior under tensile stresses in a container steel
D Wu, C Huang, O Zhang, L Zhao, W Li, X Jin
Materials Letters 256, 126533
|
1 |
2019 |
| Elinvar effect in severely-deformed Ti-50.8 (at%) Ni thin belt
YW Song, M Jin, S Zuo, X Jin
Materials Letters 252, 96-99
|
1 |
2019 |
| Giant elastocaloric effect with wide temperature window in an Al-doped nanocrystalline Ti–Ni–Cu shape memory alloy
H Chen, F Xiao, X Liang, Z Li, Z Li, X Jin, T Fukuda
Acta Materialia 177, 169-177
|
8 |
2019 |
| Martensitic transformation and superelasticity in Au7Cu5Al4 shape memory alloy microwires
G Pang, M Jin, S Zuo, X Jin
Intermetallics 112, 106527
|
|
2019 |
| Nano-sized MX carbonitrides contribute to the stability of mechanical properties of martensite ferritic steel in the later stages of long-term aging
Y Xu, W Li, M Wang, X Zhang, Y Wu, N Min, W Liu, X Jin
Acta Materialia 175, 148-159
|
1 |
2019 |
| Effect of Hydrogen Doping on Stress-Induced Martensitic Transformation in a Ti-Ni Shape Memory Alloy
Z Li, F Xiao, X Liang, H Chen, Z Li, X Jin, T Fukuda
Metallurgical and Materials Transactions A 50 (7), 3033-3037
|
2 |
2019 |
| Orientation dependence of elastocaloric effect in an aged Ni-rich Ti-Ni alloy
F Xiao, X Liang, H Chen, Z Li, Z Li, X Jin, T Fukuda
Scripta Materialia 168, 86-90
|
|
2019 |
| A Finite-Element Approach for the Partitioning of Carbon in Q&P Steel
W Li, Y Gong, XJ Jin
Metallurgical and Materials Transactions B 50 (3), 1417-1427
|
|
2019 |
| The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels
B Liu, W Li, X Lu, X Jia, X Jin
Wear 428, 127-136
|
18 |
2019 |
| High temperature internal friction in Ni50. 3Ti29. 7Zr20 shape memory alloy
S Zuo, R Wu, G Pang, Y Yang, M Jin
Intermetallics 109, 174-178
|
1 |
2019 |
| Internal friction of the R-phase in single crystalline Ti-50.8 Ni (at.%) alloy containing controlled precipitate of Ti3Ni4
X Liang, F Xiao, H Chen, Z Li, Z Li, X Jin, T Fukuda
Scripta Materialia 166, 44-47
|
3 |
2019 |
| Evolution of Fracture Mode in Nano-twinned Fe-1.1 C-12.5 Mn Steel
M Khedr, L Wei, M Na, L Yu, J Xuejun
JOM 71 (4), 1338-1348
|
1 |
2019 |
| Introduction of nanoprecipitation and transformation-induced plasticity in ultra-low carbon medium manganese quenching-partitioning-tempering steels
W Li, X Ding, X Jin
Heat Treatment and Surface Engineering 1 (1-2), 48-56
|
1 |
2019 |
| Nanoprecipitation-suppressed ferrite transformation (γ→ α) during tempering in a medium‑manganese steel
Y Xu, W Li, X Zuo, Y Li, C Zhang, N Min, H Chen, X Jin
Scripta Materialia 162, 391-396
|
1 |
2019 |
| Improvement of the stability of superelasticity and elastocaloric effect of a Ni-rich Ti-Ni alloy by precipitation and grain refinement
H Chen, F Xiao, X Liang, Z Li, Z Li, X Jin, N Min, T Fukuda
Scripta Materialia 162, 230-234
|
12 |
2019 |
| Growth of B2 parent phase grain assisted by martensitic transformation in a nanocrystalline Ti-50.8 Ni (at.%) shape memory alloy
X Liang, F Xiao, H Chen, Z Li, X Jin, T Fukuda
Scripta Materialia 159, 37-40
|
1 |
2019 |
| Effect of intermediate temperature annealing on the stability of retained austenite and mechanical properties of medium Mn-TRIP steel
L Luo, W Li, S Liu, L Wang, X Jin
Materials Science and Engineering: A 742, 69-77
|
9 |
2019 |
| Shape Memory and Elastocaloric Effect in Au 7Cu 5Al 4 Shape Memory Alloy
G Pang, M Jin, S Zuo, X Jin
Available at SSRN 3428073
|
|
2019 |
| An Extraordinary Reversed Austenite Transformation Behavior in a Cu-Rich Medium Manganese Steel
Y Li, W Li, Y Li, N Min, W Liu, S Gao, C Zhang, H Liu, X Jin
Available at SSRN 3310168
|
|
2019 |
| Enhanced toughness of bearing steel by combining prior cold deformation with martensite pre-quenching and bainite transformation
X Lu, D Qian, W Li, X Jin
Materials Letters 234, 5-8
|
11 |
2019 |
| Study on Extreme Tip Cold Bending Performance of Micro Alloyed Hot-stamped Steel
Y Feng, MT Ma, Y Zhao, LF Song, JP Zhang, XJ Jin
Advanced High Strength Steel And Press Hardening-Proceedings Of The 4th …
|
|
2018 |
| Microstructure-based finite element modeling of effect of metastable austenite on mechanical properties of quenching and partitioning (Q&P) 980 steel
H Zheng, W Li, Y Gong, L Wang, X Jin
Journal of Iron and Steel Research International 25 (11), 1140-1148
|
1 |
2018 |
| Stable and large superelasticity and elastocaloric effect in nanocrystalline Ti-44Ni-5Cu-1Al (at%) alloy
H Chen, F Xiao, X Liang, Z Li, X Jin, T Fukuda
Acta Materialia 158, 330-339
|
17 |
2018 |
| Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties
Y Li, Y Lu, W Li, M Khedr, H Liu, X Jin
Acta Materialia 158, 79-94
|
12 |
2018 |
| Size effect on the mechanical behavior of single crystalline Fe-31.2 Pd (at.%) micropillars
F Xiao, K Chu, X Jin, F Ren, T Fukuda, T Kakeshita, Q Sun
Scripta Materialia 152, 141-145
|
4 |
2018 |
| Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels
P Zhou, W Li, H Zhao, X Jin
International Journal of Hydrogen Energy 43 (24), 10905-10914
|
9 |
2018 |
| Stress-induced reverse martensitic transformation in a Ti-51Ni (at%) alloy aged under uniaxial stress
F Xiao, H Chen, X Jin, Z Nie, T Kakeshita, T Fukuda
Scientific reports 8 (1), 1-11
|
3 |
2018 |
| Electrochemical hydrogen permeation properties of MoS2 and Ni80Cr20 films prepared by magnetron sputtering on pure iron
P Zhou, W Li, X Jin
Journal of The Electrochemical Society 165 (5), E256
|
4 |
2018 |
| High damping capacity of single crystalline iron-palladium alloy exhibiting a weak first-order martensitic transformation
S Zuo, F Xiao, X Jin, T Fukuda, T Kakeshita
Journal of Alloys and Compounds 740, 1007-1011
|
3 |
2018 |
| Enhanced wear resistance of nanotwinned austenite in higher Si nanostructured bainitic steel
B Liu, X Lu, W Li, X Jin
Wear 398, 22-28
|
5 |
2018 |
| Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5 Mn-1.2 C Austenitic Steel
M Khedr, W Li, X Jin
TMS Annual Meeting & Exhibition, 113-121
|
|
2018 |
| Mechanism of improved hydrogen embrittlement resistance of low-temperature plasma carburised stainless steel
Y Li, W Li, X Zhu, H Zhou, X Jin
Surface Engineering 34 (3), 189-192
|
2 |
2018 |
| The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel
Y Li, W Li, W Liu, X Wang, X Hua, H Liu, X Jin
Acta Materialia 146, 126-141
|
28 |
2018 |
| Elastocaloric Effect Associated with Different Types of Martensitic Transformations: Typical First‐Order and Weak First‐Order Ones
F Xiao, T Fukuda, X Jin, J Liu, T Kakeshita
physica status solidi (b) 255 (2), 1700246
|
|
2018 |
| Improving hydrogen embrittlement resistance of Hadfield steel by thermo-mechanical flash-treatment
M Khedr, W Li, X Zhu, P Zhou, S Gao, X Jin
Materials Science and Engineering: A 712, 133-139
|
8 |
2018 |
| Effects of titanium micro-nanopermeable structures on osteogenic differentiation
J Liu, M Jin, Z Zhang, L Wu, X Jin, C Zhang, Y Xing
Journal of Nanomaterials 2018
|
1 |
2018 |
| Communication—Hydrogen Permeation Resistance of Nickel Coating Enhanced by Adding the Rare Earth Element Ce
P Zhou, W Li, B Liu, X Jin
Journal of The Electrochemical Society 164 (14), D1042
|
|
2017 |
| The effect of applied compressive stress on the diffusion of carbon in carbon supersaturated S-phase layer
W Li, W Guo, X Zhu, X Jin, X Li, H Dong
Surface and Coatings Technology 331, 1-6
|
4 |
2017 |
| Tensile behavior and deformation mechanism of quenching and partitioning treated steels at different deforming temperatures
L Luo, W Li, Y Gong, L Wang, X Jin
Journal of Iron and Steel Research International 24 (11), 1104-1108
|
1 |
2017 |
| Effects of hot/cold deformation on the microstructures and mechanical properties of ultra-low carbon medium manganese quenching-partitioning-tempering steels
Y Li, W Li, N Min, W Liu, X Jin
Acta Materialia 139, 96-108
|
27 |
2017 |
| Improved resistance to hydrogen embrittlement by tailoring the stability of retained austenite
K Wu, X Lu, P Zhou, W Li, X Jin
Materials Science and Technology 33 (13), 1497-1504
|
1 |
2017 |
| The effect of microstructure evolution on the mechanical properties of martensite ferritic steel during long-term aging
Y Xu, Y Nie, M Wang, W Li, X Jin
Acta Materialia 131, 110-122
|
31 |
2017 |
| Elastocaloric effect induced by the rubber-like behavior of nanocrystalline wires of a Ti-50.8 Ni (at.%) alloy
X Liang, F Xiao, M Jin, X Jin, T Fukuda, T Kakeshita
Scripta Materialia 134, 42-46
|
17 |
2017 |
| Comparison of hydrogen permeation properties of pure Ni, Ni-MoS2, Ni-graphene composite coatings deposited on quenching and partitioning steel and the hot-dipping galvanized steel
P Zhou, W Li, X Jin
Journal of the Electrochemical Society 164 (7), D394
|
5 |
2017 |
| Suppression of Martensitic Transformation in Co2Cr(Ga,Si) Heusler Alloys by Thermal Cycling
X Liang, F Xiao, X Jin, T Fukuda, T Kakeshita
Metallurgical and Materials Transactions A 48 (5), 2105-2108
|
1 |
2017 |
| Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel
J Wang, Z Wang, X Wang, Q Yang, X Jin, L Wang
Scripta Materialia 129, 25-29
|
9 |
2017 |
| Hydrogen Traps and Hydrogen Induced Cracking in 20CrMo Steel
W Li, X Zhu, J Yao, X Jin, X Ding
ISIJ International 57 (1), 170-175
|
2 |
2017 |
| Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures
L Luo, W Li, L Wang, S Zhou, X Jin
Materials Science and Engineering: A 682, 698-703
|
33 |
2017 |
| Fabrication and corrosion performances of pure Ni and Ni-based coatings containing rare earth element Ce and graphene by reverse pulse electrodeposition
P Zhou, W Li, Y Li, X Lu, X Jin, J Chen
Journal of The Electrochemical Society 164 (2), D75
|
11 |
2017 |
| Modeling of movement of liquid metal droplets driven by an electric field
MF Wang, MJ Jin, XJ Jin, SG Zuo
Physical Chemistry Chemical Physics 19 (28), 18505-18513
|
10 |
2017 |
| Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance
Y Li, W Li, JC Hu, HM Song, XJ Jin
International Journal of Plasticity 88, 53-69
|
32 |
2017 |
| The effect of MoS2 content on the protective performance of Ni-MoS2 composite coatings against hydrogen embrittlement in high strength steel
P Zhou, W Li, Y Li, X Jin
Journal of the Electrochemical Society 164 (2), D23
|
7 |
2016 |
| B19-phase transition and related tensile properties of Ti50Ni30Cu20 shape memory alloy doped with hydrogen
S Zuo, M Jin, Y Song, X Jin
Journal of Intelligent Material Systems and Structures 27 (18), 2517-2523
|
2 |
2016 |
| Quantitative assessment of retained austenite in quenching and partitioning treated multiphase steel
HS Zhao, W Li, X Zhu, XH Lu, L Wang, S Zhou, XJ Jin
Materials Science and Technology 32 (15), 1619-1624
|
1 |
2016 |
| Analysis of microstructure and mechanical properties of ultrafine grained low carbon steel
H Liu, B Liu, Y Wang, X Jin
Journal of Wuhan University of Technology-Mater. Sci. Ed. 31 (5), 1099-1104
|
7 |
2016 |
| Stable elastocaloric effect under tensile stress of iron-palladium alloy and its in situ X-ray observation
F Xiao, X Liang, X Jin, Z Nie, T Kakeshita, T Fukuda
Acta Materialia 118, 88-94
|
11 |
2016 |
| Enhancement of mechanical properties for quenched and partitioned steels via intragranular austenite
R Wu, X Jin, X Wu, W Li, J Deng, Y Shen, L Wang
Ironmaking & Steelmaking 43 (8), 616-620
|
1 |
2016 |
| Unveiling the origin of work hardening behavior in an ultrafine-grained manganese transformation-induced plasticity steel by hydrogen investigation
X Zhu, W Li, H Zhao, Q Han, L Wang, H Jiao, X Jin
Metallurgical and Materials Transactions A 47 (9), 4362-4367
|
3 |
2016 |
| The deformation behavior analysis and mechanical modeling of step/intercritical quenching and partitioning-treated multiphase steels
H Zhao, W Li, L Wang, S Zhou, X Jin
Metallurgical and Materials Transactions A 47 (8), 3943-3955
|
5 |
2016 |
| Investigation of carbon segregation during low temperature tempering in a medium carbon steel
Y Xiao, W Li, HS Zhao, XW Lu, XJ Jin
Materials Characterization 117, 84-90
|
11 |
2016 |
| Effect of intercritical annealing on microstructural evolution and properties of quenched & partitioned (Q&P) steels
R Wu, X Jin, C Wang, L Wang
Journal of Materials Engineering and Performance 25 (4), 1603-1610
|
3 |
2016 |
| Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels
X Zhu, K Zhang, W Li, X Jin
Materials Science and Engineering: A 658, 400-408
|
48 |
2016 |
| Effect of metastable austenite on fracture resistance of quenched and partitioned (Q&P) sheet steels
R Wu, J Li, W Li, X Wu, X Jin, S Zhou, L Wang
Materials Science and Engineering: A 657, 57-63
|
8 |
2016 |
| The impact of bonite aggregate on the properties of lightweight cement-bonded bonite–alumina–spinel refractory castables
G Liu, X Jin, W Qiu, G Ruan, Y Li
Ceramics International 42 (4), 4941-4951
|
4 |
2016 |
| Graphene containing composite coatings as a protective coatings against hydrogen embrittlement in quenching & partitioning high strength steel
P Zhou, W Li, X Zhu, Y Li, X Jin, J Chen
Journal of the Electrochemical Society 163 (5), D160
|
17 |
2016 |
| Analysis of the relationship between retained austenite locations and the deformation behavior of quenching and partitioning treated steels
HS Zhao, W Li, X Zhu, XH Lu, L Wang, S Zhou, XJ Jin
Materials Science and Engineering: A 649, 18-26
|
20 |
2016 |
| Local plastic indentation resistance of retained austenite in bearing steel
X Lu, W Li, H Zhao, X Jin
ISIJ International, ISIJINT-2015-480
|
2 |
2016 |
| The effect of microsilica on the oxidation resistance of Al2O3–SiC–SiO2–C castables with Si and B4C additives
G Liu, X Jin, W Qiu, G Ruan, Y Li
Ceramics International 42 (1), 251-262
|
12 |
2016 |
| Super-plasticity via secondary twinning in magnesium nanowire revealed by molecular dynamics simulations
C Ni, H Ding, X Jin
Computational Materials Science 111, 163-174
|
15 |
2016 |
| Computational study of< 11¯ 00> symmetric tilt grain boundaries in Mg and Ti
C Ni, H Ding, M Asta, X Jin
Scripta Materialia 109, 94-99
|
17 |
2015 |
| Dynamic mechanical analysis of weak first-order martensitic transformation in an iron–palladium alloy
F Xiao, T Fukuda, T Kakeshita, M Jin, X Jin
Journal of Alloys and Compounds 649, 211-215
|
7 |
2015 |
| Origin of the anelastic behavior in Ti50Ni44Fe6 alloy
S Zuo, M Jin, D Chen, X Jin
Scripta Materialia 108, 113-116
|
5 |
2015 |
| An ultrahigh strength steel with ultrafine-grained microstructure produced through intercritical deformation and partitioning process
H Liu, H Sun, B Liu, D Li, F Sun, X Jin
Materials & Design 83, 760-767
|
29 |
2015 |
| Elastocaloric effect in Ni50Fe19Ga27Co4 single crystals
F Xiao, M Jin, J Liu, X Jin
Acta Materialia 96, 292-300
|
87 |
2015 |
| Effects of sub-zero celsius treatment and tempering on the stability of retained austenite in bearing steel
XH Lu, W Li, CL Wang, HS Zhao, XJ Jin
Acta Metallurgica Sinica (English Letters) 28 (6), 787-792
|
2 |
2015 |
| Coherency of ordered γ′ precipitates and thermoelastic martensitic transformation in FeNiCoAlTaB alloys
Y Geng, D Lee, X Xu, M Nagasako, M Jin, X Jin, T Omori, R Kainuma
Journal of Alloys and Compounds 628, 287-292
|
31 |
2015 |
| Strain-Induced Reverse Phase Transformation in Nanocrystalline Co-Ni Alloys
JY Li, W Li, MJ Jin, XJ Jin
Materials Research Letters 3 (2), 107-113
|
|
2015 |
| Elastocaloric effect by a weak first-order transformation associated with lattice softening in an Fe-31.2 Pd (at.%) alloy
F Xiao, T Fukuda, T Kakeshita, X Jin
Acta Materialia 87, 8-14
|
63 |
2015 |
| Stability of retained austenite through a combined intercritical annealing and quenching and partitioning (IAQP) treatment
RM Wu, W Li, CL Wang, Y Xiao, L Wang, XJ Jin
Acta Metallurgica Sinica (English Letters) 28 (3), 386-393
|
11 |
2015 |
| Improved resistance to hydrogen embrittlement in a high-strength steel by quenching–partitioning–tempering treatment
X Zhu, W Li, TY Hsu, S Zhou, L Wang, X Jin
Scripta Materialia 97, 21-24
|
56 |
2015 |
| Effect of S-phase on the hydrogen induced phase transition and hydrogen embrittlement susceptibility in AISI 304 stainless steel
W Li, X Zhu, C Wang, X Jin
Materials Today: Proceedings 2, S691-S695
|
7 |
2015 |
| Internal Friction Of Phase Transformations Observed Around Room Temperature In Ga-In-Sn Eutectic Alloys
M Jin, Q Li, R Ying, X Lu, X Jin, X Ding
Archives of Metallurgy and Materials
|
3 |
2015 |
| Mechanical Spectroscopy of Bearing Steel
X Lu, W Li, M Jin, N Min, X Jin
Archives of Metallurgy and Materials 60
|
1 |
2015 |
loading......